1.The whole machine control adopts the PLC control system and the overall
2.After the installation of the electric equipments, they must accord with the technical performance requirements
3.The cantilever amplitude adopts the form of hydraulic amplitude.
4.The balance weight is subject to the debugging and the principle is to ensure the realization of the idle amplitude movement. The automatic arm support pitch-up is at any time prohibited in any position
5.After the installation of the roller and the carrier roller, they shall rotate flexibly without any lock or touch
6.Plate shall be set at the obvious place for the machine and the size and technical requirements shall meet with the JB8-82 stipulation
7.The cart running is speed-adjusted with frequency conversion.
|
